How is rubber electrically stable?

high quality NBR rubber electrically conductive, oil and petrol resistant (short term)

Transcript

1 OEL-FAVORIT electrically conductive pressure hose for use in oil and hazardous goods according to DIN Quality made in Germany Hose construction 100% polyester high-strength, round woven chain, double-twisted, twill weave with three interwoven copper strands max.longitudinal stretch 3% max.transverse stretch 3% Inner lining of high-quality NBR Electrically conductive rubber, resistant to oil and petrol (short-term). External coating, polyurethane coated, standard color black. Polyurethane coating increases abrasion resistance and service life, is easy to clean and reduces water absorption. Electrical resistance <10 6 Ohm inner diameter Weight Burst pressure Working pressure * mm g / m bar bar * maximum recommended working pressure of the hose, or the maximum working pressure of the integrated one, whichever is lower. Special application suitable as a flat, rollable attack hose in powder extinguishing systems PARSCH Schläuche Armaturen GmbH & Co. KG Gildestrasse Ibbenbüren / Germany Telephone: +49 (0) Fax: +49 (0)

The special inner rubber lining ensures electrical conductivity. Applicable standards DIN electrical conductivity tested by PTB 29/08/11 certified according to DIN EN ISO 9001: 2008 quality management system

3 PARSCH SYNTHETIC 3Z COLOR red-dyed fire hose for pumps and fire-fighting vehicles according to DIN 14811: Class 1 Quality made in Germany Hose construction Fabric 100% red dyed polyester, high-strength, round-woven chain 3-fold twisted, twill weave (3-fold chain guarantees higher abrasion resistance and longer service life! ) Max.longitudinal expansion 3%, max.transverse expansion 3% Inner lining Two-layer rubber lining made of black SBR rubber and white NBR adhesive layer (oil protection layer). Ozone-resistant and externally oil-resistant. This rubber coating guarantees a smooth inner wall and very little friction loss. Yarn dyed red on the outside Flexibility and rollability corresponds to the natural white hoses Inner diameter weight Burst pressure Working pressure * Wall thickness DIN test no. ** approx. Mm inch g / m bar bar mm 19 ¾,, ¼, ½,, 50 ZPC ¾,, 60 ZPC ½, ¾,, 70 ZPC ½,, ⅓,,, 90 * maximum recommended working pressure of the hose, or the maximum working pressure of the integrated hose, whichever is lower. ** issued by the Central Testing Office for, Celle. PARSCH Schläuche Armaturen GmbH & Co. KG Gildestrasse Ibbenbüren / Germany Telephone: +49 (0) Fax: +49 (0)

4

5 PARSCH SYNTHETIC 3Z REFLEX fire hose according to DIN 14811: Class 1 Quality made in Germany, high-strength fabric, 100% signal yellow or bright orange colored polyester, round woven warp 3-fold twisted, twill weave (3-fold chain guarantees higher abrasion resistance and longer service life !) max.longitudinal stretch 3% max.transverse stretch 3% Inner lining Two-layer rubber lining made of black SBR rubber and white NBR adhesive layer (oil protection layer). Ozone-resistant and externally oil-resistant. This rubber coating guarantees a smooth inner wall and very little friction loss. Yarn colored fluorescent yellow or orange on the outside for increased workplace safety Flexibility and rollability corresponds to the natural white hoses Inner diameter Weight Space pressure strength Working wall DIN test no. ** approx. Mm inch g / m bar bar mm signal yellow bright orange 19 ¾,, 40 ZPC ZPC ¼, ½,, 50 ZPC ZPC ¾,, 60 ZPC ZPC ½, ¾,, 70 ZPC ZPC ½,, ⅓,,, 90 * maximum recommended working pressure of the hose, or the maximum working pressure of the integrated one, whichever is lower . ** issued by the Central Testing Office for, Celle. PARSCH Schläuche Armaturen GmbH & Co. KG Gildestrasse Ibbenbüren / Germany Telephone: +49 (0) Fax: +49 (0)

6

7 PARSCH SYNTHETIC 3Z SL uncoated fire hose for pumps and fire engines according to DIN 14811: Class 1 Quality made in Germany Hose construction 100% polyester high-strength, round woven chain 3-fold twisted, twill weave (3-fold chain guarantees higher abrasion resistance and longer service life!) Max Longitudinal expansion 3%, maximum transverse expansion 3% Inner lining Two-layer rubber lining made of black SBR rubber and white NBR adhesive layer (oil protection layer). Ozone-resistant and externally oil-resistant. This rubber coating guarantees a smooth inner wall and very little friction loss. Outside uncoated, natural white Inside diameter Weight approx. Burst pressure Working pressure * Wall thickness DIN test no. ** mm inch g / m bar bar mm 19 ¾,, ¼, ½,, 50 ZPC ¾,, 60 ZPC ½, ¾,, 70 ZPC ½,, ⅓, 80 ZPC,, 90 * maximum recommended working pressure of the hose, or the maximum working pressure of the integrated hose, whichever is lower. ** issued by the Central Testing Office for, Celle. PARSCH Schläuche Armaturen GmbH & Co. KG Gildestrasse Ibbenbüren / Germany Telephone: +49 (0) Fax: +49 (0)

8

9 PARSCH SYNTHETIC 3Z SL COVERFLEX Polyurethane-coated fire hose for pumps and fire-fighting vehicles according to DIN 14811: Class 2 Quality made in Germany Hose construction 100% polyester high-strength, round woven chain 3-fold twisted, twill weave (3-fold chain guarantees higher abrasion resistance and longer service life! ) max.longitudinal stretch 3% max.transverse stretch 3% Inner lining Two-layer rubber lining made of black SBR rubber and white NBR adhesive layer (oil protection layer). Ozone-resistant and externally oil-resistant. This rubber coating guarantees a smooth inner wall and very little friction loss. External coating polyurethane coated, standard color red. Polyurethane coating increases abrasion resistance and service life, is easy to clean and reduces water absorption. Inner diameter weight burst pressure working pressure * wall thickness DIN test no. ** approx. Mm inch g / m bar bar mm 19 ¾,, 50 ZPC ¼, ½,, 60 ZPC ¾,, 80 ZPC ½, ¾,, 90 ZPC ½, , ⅓, 00 ZPC,, 10 * maximum recommended working pressure of the hose, or the maximum working pressure of the integrated one, whichever is lower. ** issued by the Central Testing Office for, Celle. PARSCH Schläuche Armaturen GmbH & Co. KG Gildestrasse Ibbenbüren / Germany Telephone: +49 (0) Fax: +49 (0)

10

11 PARSCH SYNTHETIC SL uncoated fire hose for pumps and fire-fighting vehicles according to DIN 14811: Class 1 Quality made in Germany Hose construction 100% polyester high-strength, round woven chain, double-twisted, twill weave max.longitudinal stretch 3% max.transverse stretch 3% inner lining two-layer rubber lining made of black SBR - Rubber and white NBR adhesive layer (oil protection layer). Ozone-resistant and externally oil-resistant. This rubber coating guarantees a smooth inner wall and very little friction loss. Outside uncoated, natural white Inside diameter Weight approx. Burst pressure Working pressure * Wall thickness DIN test no. ** mm inch g / m bar bar mm 19 ¾,, 30 ZPC ¼, ½,, 40 ZPC ¾,, 50 ZPC ½, ¾,, 60 ZPC ½,, ⅓,,, 80 * maximum recommended working pressure of the hose, or the maximum working pressure of the integrated hose, whichever is lower. ** issued by the Central Testing Office for, Celle. PARSCH Schläuche Armaturen GmbH & Co. KG Gildestrasse Ibbenbüren / Germany Telephone: +49 (0) Fax: +49 (0)

12 PARSCH SYNTHETIC SL uncoated fire hose for pumps and fire-fighting vehicles according to DIN 14811: class 1 two-layer rubber coating Properties areas of application untwisted (no twist) good abrasion resistance and long service life resistant to oil, petrol and chemicals from the outside low pressure loss light and supple - kink resistant, aging, ozone- and weather-resistant small roll diameter maintenance-free cold-resistant up to - 30 C heat-resistant short-term up to + 80 C easy to repair (repair material and vulcanizing device are available on request) fire brigades industrial fire brigades agricultural sprinkling shipping refineries industrial system Storz, or other international standard lengths up to meters maximum length 300 m of double-twisted fabric applicable standards DIN: Class 3, pren 1924 Class 1 BS 6391: 2009, Type 1, NEN 2242 MED (Steering wheel) Type Examination Certificate No / B0 EC Module B Quality Management System ApprovalNo. SEE Module D 29/08/11 certified according to DIN EN ISO 9001: 2008 quality management system

13 PARSCH SYNTHETIC SL COVERFLEX Polyurethane-coated fire hose for pumps and fire-fighting vehicles according to DIN 14811: Class 2 Quality made in Germany Hose construction 100% polyester high-strength, round-woven chain, double-twisted, twill weave, max.longitudinal stretch 3%, max.transverse stretch 3%, inner lining, two-layer rubber coating black SBR rubber and white NBR adhesive layer (oil protection layer). Ozone-resistant and externally oil-resistant. This rubber coating guarantees a smooth inner wall and very little friction loss. External coating polyurethane coated, standard color red. Polyurethane coating increases abrasion resistance and service life, is easy to clean and reduces water absorption. Inner diameter weight burst pressure working pressure * wall DIN test no. ** approx. Thickness mm inch g / m bar bar mm 19 ¾,, 40 ZPC ¼, ½,, 50 ZPC ¾,, 60 ZPC ½, ¾,, 70 ZPC ½,, ⅓,,, 90 * maximum recommended working pressure of the hose, or the maximum working pressure of the integrated hose, whichever is lower. ** issued by the Central Testing Office for, Celle. PARSCH Schläuche Armaturen GmbH & Co. KG Gildestrasse Ibbenbüren / Germany Telephone: +49 (0) Fax: +49 (0)

14E.D. (Steering wheel) Type Examination Certificate No / B0 EC Module B Quality Management System ApprovalNo. SEE Module D certified according to DIN EN ISO 9001: 2008 quality management system 29/08/11

15 SUPRA SYNTHETIC oil-resistant fire hose in a class of its own according to DIN 14811: Class 2 Quality made in Germany Hose construction fabric inner lining outer coating 100% polyester high-strength, round woven warp 3-fold twisted weft reinforced and multi-twisted twill weave This fabric construction guarantees very high abrasion resistance max.longitudinal stretch 3% max Transverse elongation 3% two-layer rubber lining made of black NBR rubber and white NBR adhesive layer. Resistant to oil, gasoline and chemicals. This rubber coating with a wall thickness of 1 mm guarantees a smooth inner wall and very little friction loss. Polyurethane coated, standard color red Polyurethane coating increases abrasion resistance and service life, is easy to clean and reduces water absorption. Inner diameter weight burst pressure working pressure * wall thickness DIN test no. ** approx. Mm inch g / m bar bar mm,, 70 ZPC, 90 ZPC, 00 ZPC ⅓, 10 * maximum recommended working pressure of the hose, or the maximum working pressure of the integrated, whichever is less. ** issued by the Central Testing Office for, Celle. PARSCH Schläuche Armaturen GmbH & Co. KG Gildestrasse Ibbenbüren / Germany Telephone: +49 (0) Fax: +49 (0)

16

17 REELOFLEX natural white fire hose for wall hydrants according to DIN EN: 2004 Quality made in Germany Hose construction 100% polyester high-strength, round woven chain, double-twisted, linen weave max.longitudinal stretch 3% max.transverse stretch 3% inner lining two-layer rubber lining made of black SBR rubber and white NBR -Adhesive layer (oil protection layer). Ozone-resistant and externally oil-resistant. This rubber coating guarantees a smooth inner wall and very little friction loss. Outside uncoated, natural white Inside diameter Weight Burst pressure Working pressure * Wall thickness DIN EN test no. mm inch g / m bar bar mm, 30 ZPC, 40 ZPC, 50 ZPC * maximum recommended working pressure of the hose, or the maximum working pressure of the integrated one, whichever is lower. PARSCH Schläuche Armaturen GmbH & Co. KG Gildestrasse Ibbenbüren / Germany Telephone: +49 (0) Fax: +49 (0)

18 REELOFLEX natural white fire extinguishing hose for wall hydrants according to DIN EN: 2004 two-layer rubber lining properties untwisted (no twist) resistant to oil, petrol and chemicals from the outside low pressure loss light and flexible - kink-resistant, resistant to aging, ozone and weathering, small roller diameter, maintenance-free, cold-resistant up to - 30 ° C heat-resistant up to + 80 C easy to repair (repair material and vulcanizing device are available on request) standard lengths meters maximum length up to 300 m Wall hydrants double twisted linen binding system Storz or other internationally applicable standards DIN EN in conjunction with EN M.E.D. (Steering wheel) Type Examination Certificate No. SEE Module B Quality Management System Approval No. SEE Module D 07/05/12 certified according to DIN EN ISO 9001: 2008 quality management system

19 PROFI externally rubberized hose for tough operating conditions according to DIN 14811: Class 3 Quality made in Germany Hose construction Fabric 100% synthetic yarn, round woven (synthetic textile insert) max.longitudinal stretch 4% max.transverse stretch 4% inner lining & outer cover The high-quality synthetic NITRIL rubber is made in Extrusion process pushed through the fabric. Smooth inner wall with low friction loss. Outer ceiling with ribs for increased abrasion resistance. Standard colors red and black Inner diameter mm Weight Burst pressure Working pressure wall approx. * Thickness g / m bar bar mm DIN test no. ** Inch 19 ¾,, ¼, ½,, ¾,, 30 ZPC ½, ¾,, 60 ZPC ½,, ⅓,,, 00 204 ***, 50 250 ***, 50 * maximum recommended working pressure of the hose, or the maximum working pressure of the integrated one, whichever is lower. ** issued by the Central Testing Office for, Celle. *** only in black. PARSCH Schläuche Armaturen GmbH & Co. KG Gildestrasse Ibbenbüren / Germany Telephone: +49 (0) Fax: +49 (0)

20 PROFI externally rubber-coated hose for harsh operating conditions according to DIN 14811: Class 3 outer cover Properties robust hose, abrasion-resistant and very long service life, flame-retardant, resistant to oil, petrol and chemicals pliable and kink-resistant, resistant to aging, ozone and weathering, maintenance-free and easy to clean, cold-resistant up to - 30 C heat-resistant short-term up to + 80 C easy to repair (repair material and vulcanizing device are available on request) standard lengths meters maximum length up to 150 m areas of application color fire brigades industrial fire brigades agricultural sprinkling shipping refineries industry standard colors red and black special colors yellow and blue on request (minimum quantity m) System Storz, or other internationally applicable standards DIN: Class 3, pren 1924 Class 4 BS 6391: 2009, Type 3, NEN 2242 MED (Steering wheel) Type Examination Certificate No / B0 EC Module B Quality Management System ApprovalNo. SEE Module D 29/08/11 Profi black certified according to DIN EN ISO 9001: 2008 quality management system